Most often, when carrying out a house of repair, the floor is painted last. As a rule, few of us think about how and what the floor paints correctly. Therefore, below is the technology of proper painting floors.
To paint a wooden floor, you will need a painting tape, a chisel, putty, water -based paint, primer, rollers and brushes, painting tray, spatula.
Start the process with the preparation of the floor, we mean that you need to get rid of the wide cracks, to achieve the evenness of the boards, it directly depends on how even, practical and beautiful painting will be pain. Most likely, at this stage you will have to face a problem such as knots. Their chisel up to three -millimeter depths, and then put it smoothly.
Make sure that the floor is dry before you start applying paint, the quality of painting depends on it. Paint a small piece of the board on the floor, check after two days, if the paint does not stick to the fingers, then it dries quickly enough.
Proceed directly to painting. Pay special attention to skirting boards so as not to stain the walls of the already painted walls, the painting tape will also help you with this. Take your time, applying paint in several thick layers, over time they wrinkle and spoil the whole view.
Two days after you paint the floor, it will be necessary to apply the second layer. If the translusion of the boards is visible after the second painting, then you need to paint the floor for the third time. After applying the third layer, leave the floor to dry for three days.
After drying the floor, be sure to wash it with ordinary water so that the traces of the Olifa do not stay.
In principle, that’s all. Important note: Use the mask while working with paint to protect the respiratory system from its vapors.
